Changes to Step #3
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| [title] Lift the upper case | |
| - | [* icon_note] The upper case is secured |
| + | [* icon_note] The upper case is secured by magnets. |
| [* black] Grip the top edge of the upper case above the keyboard and lift straight up to release it. | |
| - | [* icon_caution] Don't try to completely remove the upper case, as it's still connected to the laptop. |
| + | [* icon_caution] Don't try to completely remove the upper case, as it's still connected to the laptop by a cable. |
| [* black] Lift the bottom edge of the upper case up and away from the laptop, taking care to not strain the ribbon cable underneath. | |
| [* icon_reminder] During reassembly, lower the upper case onto the lower case until the magnets snap into place and it lays flat. | |
| [* icon_caution] Check that the upper case sits flush around the entire perimeter. Any gaps between the upper and lower case near the screen could damage the screen as it closes. |